8-3
Burst Configuration Example
Network Requirements
In a customer network shown in
Figure 8-1
,
z
A server connects to the switch through a 1000 Mbps Ethernet interface. The server sends dense
broadcast or multicast traffic to the hosts irregularly.
z
Each host connects to the switch through a 100 Mbps network adapter.
Configure the switch to process dense traffic from the server to guarantee that packets can reach the
hosts.
Figure 8-1
Network diagram for burst configuration
100M
……
1000M
100M
100M
100M
Server
Switch
Host A
Host B
Host M
Host N
Configuration Procedure
# Enter system view.
<Switch> system-view
# Enable the burst function.
[Switch] burst-mode enable
