1-6
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a remote source
mirroring group
mirroring-group groupid
remote-source
Required
In system view
mirroring-group groupid
mirroring-port mirroring-port-list
{
both
|
inbound
|
outbound
}
interface
interface-type
interface-number
[
mirroring-group groupid
]
mirroring-port
{
both
|
inbound
|
outbound
}
Configure
mirroring
ports
In interface
view
quit
Required
In system view, you can
configure a list of mirroring
ports to the mirroring
group at a time.
In interface view, you can
assign only the current
interface to the mirroring
group. To monitor multiple
ports, repeat the step.
In system view
mirroring-group groupid
reflector-port reflector-port-id
interface
interface-type
interface-number
mirroring-group groupid
reflector-port
Configure
the reflector
port
In interface
view
quit
Required
Use either approach.
Configure the remote probe
VLAN
mirroring-group groupid
remote-probe vlan rprobe-vlan-id
Required
When configuring the mirroring ports, note that:
z
The mirroring ports and the reflector port must be located on the same device.
z
To ensure device performance, do not assign the mirroring ports to the remote probe VLAN.
When configuring the reflector port, note that:
