H3C S5810 Series Operation Manual Download Page 7

Page: 7 / 820

1-1

Obtaining the Documentation

H3C Technologies Co., Ltd. provides various ways for you to obtain documentation, through which you

can obtain the product documentations and those concerning newly added new features. The

documentations are available in one of the following ways:

H3C website

Software release notes

H3C Website

Perform the following steps to query and download the product documentation from the H3C website.

Table 1-1

Download documentation from the H3C website

How to apply for an
account

Access the homepage of H3C at http://www.h3c.com and click

Registration

at the top right. In the displayed page, provide your

information and click

Submit

to register.

How to get
documentation

In the homepage, select

Technical Support & Document

Technical

Documents

from the navigation bar at the top.

Select a product for its documents.

Software Release Notes

With software upgrade, new software features may be added. You can acquire the information about

the newly added software features through software release notes.

Summary of Contents for S5810 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S5810 Series

Reviews:

Related manuals for S5810 Series

Brands by name

Popular brands

H3C S5810 Series, Operation Manual

Search results

Summary of Contents for S5810 Series

Reviews:

Related manuals for S5810 Series

Brands by name

Popular brands