1-33
Configuring Attributes Related to the Data Sent to HWTACACS Server
Follow these steps to configure the attributes related to the data sent to the HWTACACS server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter HWTACACS scheme view
hwtacacs scheme
hwtacacs-scheme-name
—
Specify the format of the
username to be sent to an
HWTACACS server
user-name-format
{
keep-original
|
with-domain
|
without-domain
}
Optional
By default, the ISP domain
name is included in the
username.
Specify the unit for data flows or
packets to be sent to an
HWTACACS server
data-flow-format
{
data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
} |
packet
{
giga-packet
|
kilo-packet
|
mega-packet
|
one-packet
} }
*
Optional
The defaults are as follows:
byte
for data flows, and
one-packet
for data packets.
In HWTACACS
scheme view
nas-ip ip-address
quit
Set the source
IP address of
the device to
send
HWTACACS
packets
In system view
hwtacacs nas-ip ip-address
Use either command
By default, the outbound port
serves as the source IP
address to send HWTACACS
packets.
z
If an HWTACACS server does not support a username with the domain name, you can configure
the device to remove the domain name before sending the username to the server.
z
The
nas-ip
command in HWTACACS scheme view is only for the current HWTACACS scheme,
while the
hwtacacs nas-ip
command in system view is for all HWTACACS schemes. However, the
nas-ip
command in HWTACACS scheme view overwrites the configuration of the
hwtacacs
nas-ip
command.
Setting Timers Regarding HWTACACS Servers
Follow these steps to set timers regarding HWTACACS servers:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
—
Set the HWTACACS server
response timeout timer
timer response-timeout
seconds
Optional
5 seconds by default
Set the quiet timer for the
primary server
timer quiet
minutes
Optional
5 minutes by default
