|
55
Temperature Switch TS 2125
The parameter have the following meanings:
Temperatur T1 und T2 (Temperature T1/T2)
Here you can see the measured temperatures at the temperature sensors T1
and T2.
dT (T1 – T2)
Here you can see the temperature difference between sensor T1 and T2.
Intervall-Timer (measuring interval)
Here you can see the time interval in which a measurement should be made.
laufzeit Timer (pump running time)
Here you can see the length of time for the pump to run.
T1 min./max.
Here you can see the minimum and maximum temperature measured at sensor
T1.
T2 min./max.
Here you can see the minimum and maximum temperature measured at sensor T2.
T1 alarm Timer
Here you can see the value of the alarm delay on channel T1.
T2 alarm Timer
Here you can see the value of the alarm delay on channel T2.
