|
43
Temperature Switch TS 2125
relais zustand bei fehler
(relay sTaTus aT malfuncTIOn)
Here you can define the relay status if they malfunction occurs. There are three
possibilities:
1
(ON)
2
AUS (OFF)
3
No Action
Press the button
„OK“
and adjust the value with the
p
,
q
buttons. To confirm the
input press
„OK“
again. Your input has been saved.
piezo
Here you can define if an acoustic signal is given when function occurs. There
are two possibilities:
1
ON
2
OFF
Press the button
„OK“
and adjust the value with the
p
,
q
buttons. To confirm the
input press
„OK“
again. Your input has been saved.
modus starten (start mode)
When all inputs are made the mode can be started by pressing the
„OK“
button.
note n1:
input values between –55°C and +125°C.
note n2:
the input can be aborted by pressing the
“ESC”
button.
note n3:
if, during the input mode no action is taken for more than 10
seconds, the unit will automatically reset itself to the main menu
and the data which has been input is not stored.
