|
39
Temperature Switch TS 2125
Mode
„Thermometer N1“
Mode
„Thermometer N1 and N2“
Mode
„Thermo switch N1“
Mode
„Thermo switch N1 and N2“
Mode
„Temperature difference“
Mode
„Circulation pump control“
Mode
„Manual control“
Reset all
maIn menu
When the device is switched on for the first time it will show you the main
menu and the available modes/functions that can be selected. If one of these
modes requires additional inputs an extra menu will open when the mode is
selected. The selections and inputs can be made with the available buttons
p
,
q
,
?
. Once this mode is configured and started, the device will memorize the
inputs. If the device is disconnected from the mains and reconnected again it
will automatically resume its function in the mode that was last programmed. The
values T1 and T2 will be updated. If the current mode needs to be changed,
press the “
ESC
” button. This will bring you back to the main menu of the device.
confirm the selected mode by pressing the “Ok” button.
mode 1 – 8:
1.
Thermometer N1
2.
Thermometer N1 and N2
3.
Thermo switch N1
4.
Thermo switch N1 and N2
5.
Temperature difference
6.
Circulation pump control
7.
Manual control
8.
Reset
