42
| Getting started
The points have the following functions:
T1 eIn (On)
Here the switching ON temperature is set. Press the button
„OK“
and adjust the
value with the
p
,
q
buttons. To confirm the input press
„OK“
again. Your input
has been saved.
T1 aus (Off)
Here the switching OFF temperature is set. Press the button
„OK“
and adjust the
value with the
p
,
q
buttons. To confirm the input press
„OK“
again. Your input
has been saved.
T1 alarm min (min. alarm value)
Here you can set the minimum temperature at which the alarm will switch on.
Press the button
„OK“
and adjust the value with the
p
,
q
buttons. To confirm the
input press
„OK“
again. Your input has been saved.
T1 alarm max (max. alarm value)
Here you can set the maximum temperature at which the alarm will switch on.
Press the button
„OK“
and adjust the value with the
p
,
q
buttons. To confirm the
input press
„OK“
again. Your input has been saved.
T1 alarm delay
Here you can set the delay for the alarm relay of the channel N1. Press the
button
„OK“
and adjust the value with the
p
,
q
buttons. To confirm the input
press
„OK“
” again. Your input has been saved. The alarm delay can be set
from 0 – 8 hours.
