|
35
Temperature Switch TS 2125
3. safeTy InsTrucTIOns
When handling electrical devices, the VDE regulations have to be applied.
Especially VDE 0100, VDE 0550/0551, VDE 0700, VDE 0711 and VDE
860.
– This device may not be modified in any way. The CE conformity has been
declared and proven and the corresponding document is deposited with the
manufacturer.
– Before opening the device, please disconnect it from the mains and/or make
sure that it is not connected to an electrical current.
– Tools may only be used if the device is disconnected from the mains.
– All connecting cables should regularly be inspected for any damages on the
insulation.
– Should any damages be found, disconnect the device immediately from the
mains and repair or exchange it.
Should there be any open questions on the installation, the devices connected,
the functions, the maintenance, the safety or any other point concerning this
device, please contact a specialist or a qualified person.
Before installing and using this device, please make sure that it and the attached
devices are suitable and compatible. In no event will liabilities be taken for
consequential or incidental direct or indirect damages resulting from improper
use or incorrect installation of the device.All unauthorized changes and/or
modifications on or in this device are not allowed. The warranty and the CE
expire, if this device is modified without authorization.
4. InsTallaTIOn
The installation may only be done by a qualified person who has knowledge
of the current guidelines and regulations!
nOTe:
Please make sure that all electricity has been switched off before
starting the installation. Make sure only components are used which are either
in the packing or described in this manual. This is for your safety.
– The device may only be used in dry rooms.
– The device is designed for wall mount.
