46
| Getting started
examples fOr The funcTIOn cOOlIng and heaTIng:
example n1:
you have a heating system and want this system to keep a
temperature of 21°C with a hysteresis of 2°C. To do this you need to set T1 EIN
at 21°C and T1 AUS at 23°C. If the temperature gets to 21°C then the relay
will switch on. At 23°C it will switch off.
example n2:
you have a cooling system and want this system to keep a
temperature of 21°C with a hysteresis of 2°C. To do this you need to set T1 EIN
at 23°C and T1 AUS at 21°C. If the temperature gets to 21°C then the relay
will switch off. At 23°C it will switch on.
menu mOde “ThermOschalTer n1”
(Thermal sWITch)
This mode has the following menu:
Der Name des Modus
(Name of the mode)
,
Funktion (Function)
2
Temperatur T1 (Temperature T1)
2
T1 Min/Max
2
T1 EIN (On)
2
T1 AUS (Off)
2
T1 Alarm Min. (min. alarm value)
2
T1 Alarm Max (max. alarm value)
2
T1 Alarm delay (delay value)
2
T1 Alarm timer
2
Relais Zustand bei Fehler
(relay status at malfunction)
2
Piezo
+
