58
| General notes and information
malfuncTIOn
Only use the device if it is functioning without disturbance. If there is any
malfunction, switch off the device immediately and consults a specialist. The
device may only be reinstalled after it has been checked thoroughly.
Signs of malfunction are if:
– The device is visibly damaged.
– The device is malfunctioning.
– Attached cables or the housing has come loose.
Repairs may only be done by a qualified person or a specialist using original
components and parts. There is the danger of electrocution.
envIrOnmenTal nOTes
Consumers are legally obligated and responsible for the proper
disposal of electronic and electrical devices by returning them to
collecting sites designated for the recycling of electrical and electronic
equipment waste. This device and/or components within the device
can be recycled. For more information concerning disposal sites, please contact
your local authority or waste management company.
error n2
Err2
errOr messages
The device can show the following error messages:
error n1
Err1
error n3
Err3
note:
If an error is detected, the relay will automatically switch off.
The temperature sensor
has a short circuit.
The received data from the
temperature sensor are corrupt.
No temperature
sensor is attached.
The temperature
sensor was reset
unexpectedly.
error n4
Err4
