44
| Getting started
funcTIOn “heIzen” (heaTIng)
– The heating function will occur if the switching ON temperature is smaller than
the switching OFF temperature.
– The unit will switch the relay ON if the measured temperature is smaller or
equal to T “EIN”.
– The unit will switch the relay OFF if the measured temperature is larger or
equal to T ”AUS”.
– The unit will switch the relay ALARM to ON if the measured temperature is
larger or equal to T “Alarm max.”.
– The unit will switch on the relay ALARM to OFF if the measured temperature is
larger than T “Alarm Min” and smaller than T “Alarm max.”.
note:
if the set temperature for ON and OFF identical, then the device will
switch to the Thermometer mode. In this mode the relays REL and ALARM are
not switched.
temperature
T alarm max
T OFF
T ON
T alarm min
heaTIng
time
switch-on point switch-off point
