38
| Getting started
leds:
1
LED
“Relais”
(Relay) is on:
The relay is switched on.
2
LED
“Alarm”
is on:
The alarm relay is switched on.
3
LED
“Fehler”
(malfunction) is on: The temperature sensor is not connected
or defect.
Buttons:
1
Button
“ESC”
: Backstep or cancellation of current mode.
2
Button
“OK”
: Confirmation or selection of value.
3
Button “
p
“: Value Up, Scroll Up
4
Button”
q
”: Value Down, Scroll Down
6. cOnTrOl menus
mode (1 – 8)
1.
Thermometer N1
2.
Thermometer N1 and N2
3.
Thermo switch N1
4.
Thermo switch N1 and N2
5.
Temperature difference
6.
Circulation pump control
7.
Manual control
8.
Reset
Preferences
„Thermal switch N1“
Preferences
„Thermal switch N1 and N2“
Preferences
„Temperature difference“
Preferences
„Circulation pump control“
Preferences
„Manual control“
Mode
„Thermometer N1“
Mode
„Thermometer N1 and N2“
Mode
„Thermo switch N1“
Mode
„Thermo switch N1 and N2“
Mode
„Temperature difference“
Mode
„Circulation pump control“
Mode
„Manual control“
Reset all
