GSSI SIR 30, Manual

Page: 93 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 87
Step 2: Select File
1
The SIR 30 will now display the file list from the selected directory. The User must place a check
mark in the box next the file name in order to play back the file. If the User highlights the file name
without checking the box next to the file name, the file will not playback.
Figure 129: Select File(s).
2
After selecting the desired file, select ACCEPT. Once the file is accepted, the SIR 30 will display the
file playback screen and the system mode will change from collect to playback mode. In the playback
mode, the RADAR CONFIG menu selection is not displayed and the Channel display defaults to the
O-Scope display. The User must select the active channel to start the Linescan display.
Figure 130: Playback Mode – Single File.