GSSI SIR 30, Manual

Page: 134 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 128
4
Run through the install instructions and on completion you will receive the following messages that
give additional instructions, which you must follow:
Figure 162: Additional instructions.
Step 3: Modify the Network
1
On the Network Tab use the control at the bottom left to specify the SIR 30 you want to connect to
then enter the serial number in place of “XXX” and select Connect to Server ID0 (Ch 1-4).
2
Enter the SIR 30 serial number select and then select Get Network Information from Registry and you
will see a figure like that below:
Figure 163: Network tab.
3
After you feel confident that you have the correct configuration between the client and server, select
the Setup Shares button. Successful sharing should be indicated below.