GSSI SIR 30, Manual

Page: 71 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 65
Figure 96: Output Options – New Data Path.
Step 5: Collect Data
Select START SCAN. The SIR 30 will begin to collect data as soon as survey wheel is moved. To collect
a new file with the same settings, select NEXT FILE. The SIR 30 will begin collecting a new file as soon
as you select SAVE/DISCARD file. The SIR 30 will then increment the file name number. The User can
also select STOP from the Control Bar to stop data collection and return to the setup screen. The system
will then display and End of File message and ask if the User wishes to SAVE the data or DISCARD the
data. The User may also take advantage of the system backup cursor to pinpoint surveyed targets. The
User can select the PAUSE button from the Control Bar menu. If the survey vehicle is backed up, the
system will display a backup cursor on the collected line.
Note:
The backup cursor will not operate if the system is connected to as GPS system.
Figure 97: Backup Cursor.