GSSI SIR 30, Manual

Page: 81 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 75
Figure 110: FILE INFO MENU.
2
For example, if you start it at mile marker 10, and select COUNT UP and the collect data for one mile,
the DMI distance counter will start its count from mile 10 and end at mile 11.
Figure 111: Control Bar - COLLECT.
a)
Select FILE INFO in the Collect Data control bar at the bottom of the screen.
b)
Enter your starting point in the START POS box.
c)
Select COUNT UP if you mile makers decrease or select COUNT DOWN if your mile markers
decrease.
Note:
This option is not automatically applied to the next file. The User must make START
POSITION and DIRECTION change in the FILE INFO menu at the start of every file.
Step 8: Collect Data
1
Select START SCAN.
2
If you are using a survey wheel or DMI, the SIR 30 will start to collect data when the vehicle begins to
move.
3
To stop collecting and return to the setup screen, Select STOP SCAN. The User will be prompted if to
SAVE or DISCARD the data file, the User will them be returned to the setup screen after making the
selection.
4
To collect a new file with the same settings, and a sequential file name, select NEXT FILE when you
wish to terminate the current file. The SIR 30 will prompt you with a SAVE\DISCARD message.
After selecting either SAVE or DISCARD the system will begin to collect a new data file.