GSSI SIR 30, Manual

Page: 132 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 126
Turn off screen saver.
Firewall changes On WMI On svr Off.
4
Test DCOM Settings.
5
Restart system and Test.
6
Continue to the following steps to begin the process of setting up your client computer.
Step 1: Create the SIR 30_Admin user
Prerequisite:
You should have already gone through the initial steps of setting up your Windows 7 or
Windows Vista computer (See: “The Windows Out of box experience”). You should not try to set up the
SIR 30_Admin user during the out of box experience. Create a user named test during the out of box
experience. By doing so you will allow the maintenance tool to create a properly formatted SIR 30 user
by following the instructions below.
1
Insert the USB flash drive containing the SIR 30 Maintenance tool into the laptop computer.
2
Run the SIR 30 Maintenance tool.exe. Right-click and “Run as Administrator” .You will see the
screen below if you are logged in as anything but SIR 30_Admin.
Figure 161: SIR 30_Admin screen.