GSSI SIR 30, Manual

Page: 15 / 150

Geophysical Survey Systems, Inc. SIR® 30
Manual
MN 93-101 Rev E 9
Step 1: Create the SIR 30_Admin User
The User should have already gone through the initial steps of setting up your Windows 7 or Windows
Vista computer (“The Windows Out of box experience”) before running the SIR 30 maintenance tool. The
User should not attempt to set up the SIR 30 Administrator or “SIR 30_Admin” User privileges’ during the
out of box experience. If you are setting up the laptop for the first time, create a User named ‘Test’ during
the out of box experience. This will allow the maintenance tool to create a properly formatted SIR 30 user.
1
Insert the USB flash drive containing the SIR 30 Maintenance tool into the laptop computer.
2
To run the SIR 30 MaintenanceTools.exe, right-click and select Run as Administrator. The system will
display a warning if the User is not logged on with administrator privileges i.e., SIR 30_Admin.
Figure 7: SIR 30 Administrator Warning.
3
When the SIR 30 maintenance tool opens, the system will display the SIR 30 Maintenance Tool menu.
Figure 8: SIR 30 Maintenance Tool – Set Computer/User Group.
4
Select the Computer User/Group tab.
5
Click the Set Workgroup Name button.