GSI Group - Laser Division
JK300HP/JK300P/JK125P
Issue 2.0
Pre-installation and User Manual
Part No: 1EA300E01
Page
71 of 172
There may be more than one active Warning; if there are more than three then the second
screen is used; the Down-arrow key is not displayed unless a second screen is available.
Pressing any displayed Alarm or Warning will bring up the relevant Alarm/Warning (see
below).
6.13.4 Alarm/Warning
6.13.4.1 Function
For displaying details of Alarm and Warnings.
Warnings may be Local (ie generated by the UFP) or from the Network.
6.13.4.2 Entry/Exit
Entry either automatically when an Alarm or Warning first becomes active, or from the
Alarm/Warnings screen.
6.13.4.3 Display
Shows the Alarm or Warning number only.
On the Alarm display, the ‘Rst’ key will attempt to reset the Alarm.
The ‘Clr’ key exits the Alarm display, restoring the previous screen.
The ‘Double Up-arrow’ key is not available during a display.
6.13.4.4 Display Control
The Alarm display is displayed when an Alarm becomes active.
If ‘Reset’ is pressed, the system attempts to reset the Alarm and the Alarm display is
cleared. If the Alarm remains active the Alarm display is re-displayed.
If ‘Clear’ is pressed, the Alarm display is cleared and does not show again unless it has
become inactive in the interim (unless called from the Alarm/Warnings screen).
A Warning display is only displayed when the Warning first becomes active. Once cleared it
does not show again unless it has become inactive in the interim (unless called from the
Alarm/Warnings screen).
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 71
