GSI Group - Laser Division
JK300HP/JK300P/JK125P
Pre-installation and User Manual
Issue 2.0
Page 44 of 172
Part No: 1EA300E01
3.4 Environmental
Conditions
3.4.1 Temperature and Humidity
Environment
Temperature
Storage environment
Temperature not to fall below 2
°
C (35
°
F)
Operating environment
Max temperature 40
°
C (104
°
F)
Min temperature 5
°
C (40
°
F)
Max humidity 95% RH at 20
°
C (refer to Figure 1)
Max humidity 50%RH at 40
°
C (refer to Figure 1)
3.4.2 Degree of Protection given by Enclosure
The JK300HP/JK300P/JK125P Series Laser is a Class 4(IV) laser product. It is strongly
recommended that a Class 1(I) enclosure be built around the laser workstation. Refer to
Section 2 - Safety
for laser hazards and safe operating information.
Laser Cabinet Recommendation
GSI Group - Laser Division also recommends that the laser cabinet is housed in the
conditions of a Class 1 environment.
3.5 Electromagnetic
Compatibility
The JK300HP/JK300P/JK125P Series Laser is certified to be in conformance with EMC
Directive 89/336/EEC and amendments.
3.6 Transportation
WARNING
OBSERVE FACTORY SAFE LIFTING AND MANUAL HANDLING
PROCEDURES BEFORE ATTEMPTING TO MOVE THIS EQUIPMENT.
The laser cabinet can be moved by the following methods:
•
Forklift truck.
•
Pallet truck.
•
By hand (If cabinet is on castors).
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 44
