GSI Group - Laser Division
JK300HP/JK300P/JK125P
Issue 2.0
Pre-installation and User Manual
Part No: 1EA300E01
Page
65 of 172
Increment
Increments the value.
Decrement
Decrements the value.
Cursor
Moves the cursor from left to right or from LSD to MSD (ie
rotate right).
Editing is entered and exited by pressing the value displayed.
Editing keys appear when a numeric or state value is selected for editing and the cursor
appears under the LSD.
In numeric editing:
Increment
and
Decrement
modify the value by the place-value of the digit at the
cursor. If held for more than 1 sec the value auto-increments(-decrements) until the
key is released. Values cannot exceed internal limits.
In state editing:
Increment
and
Decrement
rotate the value through the list of available states.
Incr
. rotates forwards;
Decr
. rotates backwards.
In all cases, when the editing key is released, the resultant value is transmitted via
network message. The value actually displayed is the result of polling the destination
of the transmitted value
. It is therefore possible that the value displayed after
editing is not what the operator expects.
The
Special Function key
only appears if active; its function is defined for that screen only.
6.5.7 Status Bar
1 10 12.34 ALARM WARN
This is normally displayed on the bottom line of selected screens although occasionally it
appears above the bottom row of keys. It shows:
Selected Shutter No and its state –
= shutter is open.
Selected Shape No
Current Energy level
Indication of an active Alarm –
ALARM = active alarm.
Indication of an active Warning –
WARN = active warning.
6.5.8 Local warnings
Local messages such as “Out of range” or “Access disallowed
”
use the Warnings pop-up.
6.6 WELCOME
screen
6.6.1 Function
Stays off until UFP is touched.
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 65
