GSI Group - Laser Division
JK300HP/JK300P/JK125P
Issue 2.0
Pre-installation and User Manual
Part No: 1EA300E01
Page
3 of 172
1. General
Information
1.1 Class
of
Laser
The JK300HP/JK300P/JK125P Series Laser is a Class 4 (IV) Laser system. Refer to
Section 2 – Safety for information on Laser radiation hazards and safety precautions in a
Class 4 (IV) environment.
1.2 Intended Users
All operators using this Laser equipment must be officially trained and authorised. They must
also be fully conversant with the following:
•
Laser hazards, safety procedures and correct use of related safety equipment.
•
Hazards related to the use of Lasers for materials processing, prescribed safety
procedures and related equipment.
•
The contents of this manual, and therefore the related safety provisions prescribed for
the safe installation of the equipment.
Authorised Personnel are classified as Engineers who have attended official GSI Group -
Laser Division Training Courses and have been certified as competent.
1.3 Documentation
The JK300HP/JK300P/JK125P Series Laser is supplied with a Pre-installation and User
Manual.
The Manual provides information on Pre-installation requirements, Installation Procedures,
De-Commissioning Procedures and user information.
The Pre-installation section specifies site preparation and the interfaces that need to be in
place prior to Laser delivery.
The Installation section provides information and the procedures necessary for installation
and commissioning and decommissioning.
The User Manual section provides information on the Operating Procedures, Routine
Maintenance to Level 1 and Fault Diagnosis.
1.3.1 Safety Paragraphs
Throughout the documentation
‘WARNING’, ‘CAUTION’
and
‘Note’
paragraphs appear. It is
the responsibility and duty of all personnel who operate and maintain this equipment to fully
understand the
WARNING
,
CAUTION
and
Note
procedures in order to reduce or eliminate
hazards.
WARNING
WARNING TEXT MUST BE OBSERVED TO PREVENT PERSONAL INJURY
TO YOURSELF AND OTHERS.
CAUTION
Caution text must be observed to prevent possible damage or destruction to
equipment or loss of operational effectiveness.
Note
Note text must be observed for essential and effective operating procedures and conditions.
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 3
