Grundig POWERMAX Q2, Service Manual

Page: 71 / 120

71
DETAILED CHANNEL SETTINGS
----------------------------------------------------
two LNBs are used, select the required op-
tion (»1/2« or »2/2«).
User Band
Using »
<
« or »
>
«, select the antenna socket
used.
UB Frequency (MHz)
Using » 1...0 «, enter the required frequency
for the selected antenna socket.
Notes:
7
Use installation equipment supported / sug-
gested by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
7
User band and User band frequency is
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
9 Press »

« (blue) to exit antenna settings.
10 Select the Channel Type.
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (D Radio) and press » OK « to
select and mark or unmark the »Digital«
and/or »Radio« items.