Grundig POWERMAX Q2, Service Manual

Page: 70 / 120

70
DETAILED CHANNEL SETTINGS
----------------------------------------------------
10 Select the Channel Type.
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (D Radio) and press » OK « to
select and mark or unmark the »Digital«
and/or »Radio« items.
11
Select Scan Mode.
To select whether you want to scan free digi-
tal television channels (Free), only encrypt-
ed digital television channels (Scrambled)
or both (Free + Scrambled), press »
V
« or
»
Λ
« and press »
OK
« to select and mark
or unmark the »Free« and/or »Scrambled«
elements.
12 Press »

« (Red) to start scanning.
Notes:
7
When updating via the same satellites a
security query is displayed at the beginning
of the search.
7
To store them in the previously stored chan-
nels list, select »Yes« with »
<
« or »
>
«;
or
select »No« to delete the channels and
press »
OK
« to confirm.
– The »Digital Search« menu will appear
and the search for TV channels will begin.
– The search is complete as soon as
»Search is completed!« appears.
Note:
7
The search can be terminated with » EXIT «.
13 Press »

« (yellow) to switch to the Chan-
nel Editor;
or
Press » EXIT « to end the setting.
Antenna settings for digital sat-
ellite channels and searching for
channels automatically with SCR
system
Notes:
7
Your TV supports SCR system (Single Chan-
nel Router). SCR (Single Channel Router
- EN 50494).
7
LNB settings described in the following sec-
tion require significant expertise on satellite
systems. Consult your authorized dealer
about this matter.
1 Open the menu with » MENU «.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3
Select »Source« with »
>
« or »
<
« and press
»
V
« to confirm.
– »Source Setup« menu will be displayed.
4 Select »Auto Channel Search« with »
V
«
and press » OK « to confirm.
5 Select »Satellite« with »
V
« or »
Λ
« and
confirm with » OK «.
6 Select »Standard Mode« with »
V
« or »
Λ
«
and confirm with » OK «.
7 Select »Antenna Settings« with »
V
« or »
Λ
«
and confirm with » OK «.
– »Antenna Settings« menu will be dis-
played.
8
Select the required elements with »
V
«,
»
Λ
«.
Satellite
Press » OK « and use »
<
«, »
>
«, »
V
« or
»
Λ
« to pick the satellite you wish to get
the digital stations from and press » OK « to
confirm.
LNB Type
If your antenna system incorporates a single
cable router multi-switch, use »Grundig
SCR« option. Press » OK « or select »Grundig
SCR« with »
<
« or »
>
«.
Select »LNB-Frequency High« with »
V
«
and enter the frequency with » 1...0 « as a
five-digit number.
Select »LNB-Frequency Low« with »
V
« and
enter the frequency with » 1...0 « as a five-
digit number.
Press »

« (green) to confirm the selection.
LNB selection
Select only the required »DiSEqC 1.0« or
»DiSEqC 1.1« option.
LNB Selection
Depending on the LNB number, press »
<
«
or »
>
«.
If only 1 LNB is used, select »1/2« and if