Grundig POWERMAX Q2, Service Manual

Page: 51 / 120

51
USING EXTERNAL DEVICES
---------------------------------------------------------------
Device Control
You can determine how the remote control of
your television will control the external device.
1 Press » « and use
<
« or »
>
« to select
either one from »HDMI1« to »HDMI4« and
then confirm with » OK« .
2 Open the menu with » MENU «.
3
Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with »
OK
«.
4 Select »TV« with »
>
« or »
<
« and press »
V
«
to confirm.
– »Source« menu will be displayed.
Device
Remote Behavior No
Put device into standby
Enhanced 4K Support On
Pictu e
Thu
XX XXX XXXX
Source Timer Sound Network TV Parental
Settings > Source
Change Area Back
5 Select the »Remote Behavior« line with »
V
«
or »
Λ
«.
6 Press »
<
« or »
>
« to select control type.
(»Pass-Through«, »Deck« or »Zap«).
Notes:
7
»Pass-Through« is included in the menu as
an option that can be selected in every
device type. »Deck« and »Tuner Control«
options change depending on the external
device connected.
7
Apply trial and error method to determine
the functions of the remote control buttons
for the selected control type.
7
Refer to the user manual of the DIGILINK
compatible device for its functions.
7
Press »
EXIT
« to finish the setting.
Switching the device to standby
This option switches the connected external
device to standby.
1
Press » « and use
<
« or »
>
« to select
either one from »HDMI1« to »HDMI4« and
then confirm with »
OK
«.
2 Open the menu with » MENU «.
3 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
4
Select »Source« with »
>
« or »
<
« and press
»
V
« to confirm.
– »Source« menu will be displayed.
5 Select »Put device into standby« with »
V
«
or »
Λ
« and press » OK « to confirm.
– The connected external device will switch
off.