Grundig POWERMAX Q2, Service Manual

Page: 65 / 120

65
1 Press »

« (red) to select »Connect« option to
establish the modem connection.
– »Push the WPS button on your Access
Point« message will be displayed.
2 Select »Select Access Point« with »
V
« or
»
Λ
« and press » OK « to confirm.
– WPS-supported wireless networks avail-
able will be scanned to be displayed in
the »Select Access Point« menu.
3
Select the network that you want to connect
to with »
V
« or »
Λ
« and press »
OK
« to
confirm.
– A 8-digit pin code will be displayed in the
Wireless WPS menu.
Note:
7
See the manual of your router to learn how
to enter PIN using a computer.
4 Use a computer to enter the PIN to the
router (e.g. AVM FRITZ! Box: menu item
WLAN Settings ... WPS) and save.
Note:
7
The 8-digit PIN code produced by the
television must be entered in the modem
interface in 2 minutes, otherwise the will be
disconnected from the modem.
5 Press »
<
« or »
>
« to select »Continue« and
confirm with » OK «.
– The message "Connection to Gateway:
Success" will be displayed.
6
Press »

« (green) to make sure that the
settings have been made and the local
network and internet connection have been
established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
7 Press » EXIT « to finish the setting.
Auto connection by inputting the net-
work password
If your router does not support "WPS-PBC” or
WPS PIN input, use this method to connect.
1 Open the menu with » MENU «.
2 Confirm »Settings« with » OK «.
3
Press »
>
« or »
<
« to select »Network Con-
figuration« and confirm with »
OK
«.
– »Network configuration« menu will be
displayed.
Change Connection Type Wireless
Network Configuration Auto
Advanced
P cture Sou ce Timer Sound Network TV
Settings > Network
Change Area Connect Test Connect on Select Back BACK
4
Confirm »Change Connection Type« with
»
OK
«.
5 Select »Wireless« with »
V
« or »
Λ
« and
confirm with » OK «.
– WiFi warning screen will be displayed.
6 Select »Yes« with »
<
« or »
>
« and confirm
WiFi with » OK «.
7
Select »Select Access Point« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
– Wireless networks available will be
scanned to be displayed in the »Select
Access Point« menu.
8 Select the network that you want to con-
nect with »
V
« or »
Λ
« and press » OK « to
confirm.
– Wireless connection password screen will
be displayed.
Note:
7
For the TV to discover the wireless modem
on the network, the network name should
support ASCII characters.
NETWORK SETUP
-------------------------------------------------------------------------------------------