Grundig POWERMAX Q2, Service Manual

Page: 31 / 120

31
USB RECORDING
-------------------------------------------------------------------------------------------
Connecting external data me-
dium
Notes:
7
It is advised to switch the television to stand-
by mode before connecting the External
Data medium.
7
Before disconnecting the external data
medium, first of all, the television must be
switched to standby mode. Otherwise, may
can be damaged.
7
There are three USB inputs on the television,
namely » USB1 «, » USB2 « and » USB 3 «.
USB1 and USB2 inputs are intended for
USB devices that require additional power
(e.g. external hard disk).
1 Plug the external hard disk to USB1 or
USB2 interface of the television;
or
plug the memory stick into the USB3 inter-
face of the television.
Notes:
7
USB3 port of the TV supports 500 mA
current according to the USB standard.
Devices that consume more power such as
external hard disks can only be connected
to the USB1 and USB2 interface of the
television.
7
If you are using a power cable for the ex-
ternal hard disk that you have connected to
the »USB1 « and » USB2 « USB interface,
then the power cable of the external hard
disk must also be unplugged when the TV is
turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.