Grundig POWERMAX Q2, Service Manual

Page: 99 / 120

99
CUSTOMER SETTINGS
------------------------------------------------------------------------------
Customer settings vary depending on the prod-
uct code and model. In GF-chassis products,
many of the features are selected ON by DE-
FAULT.
The values of each feature are shown in the next
column of the table. The values of optional fea-
tures are stated in VTF (Version Demand Form)
depending on the customer’s demand.
Customer settings are not changed when soft-
ware or bootcode is installed.
!! If flash IC is required to be changed in GF-
chassis products for any reason at the service
center, relevant settings should be performed
in service menu by re-checking the tables be-
low and VTF of the product before delivery to
the customer because the values in the tables
below will take default values on software in
accordance with the product size (screen) and
features!!
Note: Following settings may vary according to
software versions.
DIVISION FEATURES SETUP VALUE TO BE SELECTED
SY
STEM C
ONFIGURA
-
TION
TV Mode Standard Customer
HDCP Verify Standard Success
Debug Mode Standard Off
Plug Play Standard Off
Hotel Optional Must be set according to VTF.
CI Key Verify Standard Success
Panel Energy Class Optional Must be set according to VTF.
Recovery Mode Standard On
AC Direct On Standard Off
SOUR
CE C
ONFIGURA
TION
ATV Standard Avail
Antenna Standard Avail
Cable Standard Avail
Satellite Optional Must be set according to VTF.
USB Standard Avail
HDMI1 Standard Avail
HDMI2 Standard Avail
HDMI3 Standard Avail
HDMI4 Standard Navail
AV1 Standard Avail
Component Standard Avail
S-VHS Standard Avail