Grundig POWERMAX Q2, Service Manual

Page: 86 / 120

86
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Displaying signal information
(only for digital television channels)
1 Open the menu with » MENU «.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3
Select »Source« with »
>
« or »
<
« and press
»
V
« to confirm.
– »Source« menu will be displayed.
4 Select »Advanced« with »
V
« or »
Λ
« and
press » OK « to confirm.
5
Select »Signal Information« with »
V
« or
»
Λ
and press »
OK
« to confirm.
– »Signal Information« menu will be dis-
played.
Notes:
7
Signal information changes depending on
the current source.
7
Signal information will be shown on the left
of the menu. The more »Frequency« and
»Signal Strength« bar stretches to the right,
the more signal you have.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6
Press »
EXIT
« to close the menu.