Grundig POWERMAX Q2, Service Manual

Page: 78 / 120

78
DETAILED CHANNEL SETTINGS
----------------------------------------------------
LNB Selection
see DiSEqC mode.
DISEqC Mode
Based on the number of current satellite
systems, select »Off«, »DiSEqC 1.0« or
»DiSEqC 1.1« with »
<
« or »
>
«.
- »Off«: For satellite systems with single
antenna.
- »DiSEqC 1.0« switch allows for receiving
from four satellites maximum at a time.
- Under »LNB selection«, use »
<
« or »
>
to
select »1/4«, »2/4«, »3/4« or »4/4« for
the satellite that corresponds to the relevant
DiSEqC positions.
- » DiSEqC 1.1« switch allows for receiving
from sixteen satellites maximum at a time.
Under »LNB selection«, use »
<
« or »
>
« to
select between »1/16« and »16/16« for
the satellite that corresponds to the relevant
DiSEqC positions.
1 Press »

« (blue) to exit antenna settings.
2
Select the Channel Type.
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (D Radio) and press »
OK
« to
select and mark or unmark the »Digital«
and/or »Radio« items.
3 Select Scan Mode.
To select whether you want to scan free digi-
tal television channels (Free), only encrypt-
ed digital television channels (Scrambled)
or both (Free + Scrambled), press »
V
« or
»
Λ
« and press » OK « to select and mark
or unmark the »Free« and/or »Scrambled«
elements.
4 Press »

« (Red) to start scanning.
Notes:
7
When updating via the same satellites a
security query is displayed at the beginning
of the search.
7
To store them in the previously stored chan-
nels list, select »Yes« with »
<
« or »
>
«;
or
select »No« to delete the channels and
press » OK « to confirm.
– The »Digital Search« menu will appear
and the search for TV channels will begin.
– The search is complete as soon as
»Search is completed!« appears.
Note:
7
The search can be terminated with »
EXIT
«.
5 Press »

« (yellow) to switch to the Chan-
nel Editor;
or
Press »
EXIT
« to end the setting.