Grundig POWERMAX Q2, Service Manual

Page: 63 / 120

63
Wireless network
Wireless network connection
1 Television is equipped with a built-in Wire-
less WiFi Adapter to connect to wireless
networks.
Notes:
7
Wireless LAN adapter supports IEEE
802.11B/G and N communication
protocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in wireless HD video playing.
7
If you use a modem that supports IEEE
802.11B/G, video playback performance
may be poor when compared to a modem
that supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol
is lower.
7
Please note that video playback perfor-
mance in a DLNA application on a wireless
local network and in a SMART Inter@ctive
TV 4.0+ application on a network with
internet connection depends on the number
of users on the network as it is the case in
every wireless network.
7
It is recommended to switch off the equip-
ment that are not in use in home network in
order to avoid unnecessary network traffic.
NETWORK SETUP
-------------------------------------------------------------------------------------------
7
Placing the modem or wireless network
sharer on an elevated location will increase
the wireless connection reception strength.
7
Wireless connection reception strength may
vary depending on the type of the modem
and the distance between the modem and
television.
Wireless network configuration
You have several ways to connect your TV to
your home network.
A Auto connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from the modem
automatically.
Depending on the router, you can use the
following options:
– Option "WPS-PBC" (Push Button Configu-
ration);
– Connection with a WPS PIN;
– Connecting by entering the network pass-
word.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
V
S
V
S