Grundig POWERMAX Q2, Service Manual

Page: 62 / 120

62
NETWORK SETUP
-------------------------------------------------------------------------------------------
Manual connection
Certain networks require a Static IP address. If
your network requires a Static IP Address, you
must enter »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (ISS) from your Internet Service
Provider.
1
Open the menu with »
MENU
«.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3 Select »Network« with »
>
« or »
<
« and
press »
V
« to confirm.
4
Confirm »Change Connection Type« with
»
OK
«.
5 Select »Wired« with »
V
« or »
Λ
« and
confirm with » OK «.
6 Select »Network Configuration« with »
V
«
and select »Manual« with »
<
« or »
>
«.
7
Press »
V
« to select »Advanced« and con-
firm with »
OK
«.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are now enabled.
Change Connection Type Wired
Network Configuration Manual
IP Address 192 168 000 200
DNS 192 168 000 254
Netmask 255 255 255 200
Gateway 192 168 000 254
Pictu e
Thu
XX XXX XXXX
Source Timer Sound Network TV Parental
Settings > Network
Change Area Connect Test Connect on Input Mode Exit Close Advanced EXIT
BACK
8
Select »IP Address« with »
V
«.
Enter the IP address with »
1…0
«.
9 Select »DNS« with »
V
«.
Enter the IP address with » 1…0 «.
10 Select »Netmask« with »
V
«.
Enter Netmask address with » 1…0 «.
11
Select »Gateway« with »
V
«.
Enter Gateway address with »
1…0
«.
12 Press »

« (red) to select »Connect« option to
establish the modem connection.
– »Connecting ... Please wait« message will
be displayed, and if the connection is suc-
cessful, Connection to Gateway: Success«
message will be displayed.
13 Press »

« (green) to make sure that the
settings have been made and the local
network and internet connection have been
established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
successful, Connection to Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
14
Press »
EXIT
« to end the settings.