Grundig POWERMAX Q2, Service Manual

Page: 66 / 120

66
NETWORK SETUP
-------------------------------------------------------------------------------------------
1
Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with »
OK
«.
– Using »
Shift
«
➡
»
OK
«, you can switch
between uppercase letters/numbers and
lowercase letters/special characters.
– Select »
Del
« to delete the character
entered and press »
OK
« to confirm.
2 Confirm the password with »

« (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
3 Press »

« (green) to make sure that the
settings have been made and the local
network and internet connection have been
established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
4
Press »
EXIT
« to finish the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
Manual connection
Certain networks require a Static IP address. If
your network requires a Static IP Address, you
must enter »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (ISS) from your Internet Service
Provider.
1
Open the menu with »
MENU
«.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3 Select »Network« with »
>
« or »
<
« and
press »
V
« to confirm.
– »Network configuration« menu will be
displayed.
4
Confirm »Change Connection Type« with
»
OK
«.
5 Select »Wireless« with »
V
« or »
Λ
« and
confirm with » OK «.
– WiFi warning screen will be displayed.
6 Select »Yes« with »
<
« or »
>
« and confirm
WiFi with » OK «.
7
Select »Network Configuration« with »
V
«
or »
Λ
« and select »Manual« with »
<
« or
»
>
«.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are now enabled.
Change Connection Type Wireless
WiFi Manual
Select Access Point N/A
Network Configuration Manual
IP Address 000 000 000 000
DNS 000 000 000 000
P cture Sou ce Timer Sound Network TV
Settings > Network
Change Area Connect Test Connection Input Mode Ex t Close Advanced EXIT
BACK
8
Select »IP Address« with »
V
«.
Enter the IP address with »
1…0
«.
9 Select »DNS« with »
V
«.
Enter DNS address with » 1…0 «.