Grundig POWERMAX Q2, Service Manual

Page: 21 / 120

21
Initial set-up
1
Switch the television set to standby using the
power switch
O/I
.
2 Switch on the television in standby mode
with » 8 «, » 1…0 «, » P+ « or » P– «.
– The Menu Language selection menu ap-
pears when the television is switched on
for the first time.
Smart Inter@ctive 4 0
Menu Language
Please select your desired menu language
Česky Dansk Deutsch Engl sh Español Eλληvıκά Français
Hrvatski taliano Magyar Neder
lands
Norsk Polski Português
Pyccкий Româneşte Slovenščina Eesti Suomi Svenska Бългaрски
Slovenčina L etuviu Türkçe
3
Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »
OK
« to confirm.
– »Welcome« menu appears.
4 Gradual set-up will be performed to use the
television. Press » OK « to start the set-up.
5 Use »
<
«, »
>
«, »
V
« or »
Λ
« to select the
country in which the television is going to be
used and press » OK « to confirm.
– When »User Mode« appears, select
»Home Mode«.
6
Confirm »Home Mode« option with »
OK
«;
or
Select »Enhanced« with »
V
« or »
Λ
« and
confirm with » OK «.
– »Home Mode« contains preconfigured
TV settings that provide energy savings
conforming EUP.
– »Enhanced« – if you will use the televi-
sion for a demo presentation, enhanced
picture and sound settings are used in this
mode. Enhanced mode consumes more
energy.
7
Select »Stand« or »Wall-mounted« with »
V
«
or »
Λ
«.
Note:
7
Choosing the location of the television is
important for automatic sound setting.
8 Press » OK « to confirm »Next«.
– »Summary« menu will be displayed.
9 Press »

« (blue) to proceed to the next
step.
– »Accessories« menu will be displayed.
10 Perform the settings in this menu if an acces-
sory used for the television is connected to
the television.
Press »
V
« or »
Λ
« to select the accessory
and adjust with »
<
«, »
>
«.
11
Press »

« (blue) to proceed to the next
step.
Notes:
7
If you wish to connect your television to the
home network,
– continue at point 12 for an automatic LAN
connection, or
– continue at point
16
for an automatic
WLAN connection.
Note:
7
If connecting to a home network is not
necessary, skip the use setting »

« (blue).
Continue setting at point 23 28 or 33 .
SETTINGS
------------------------------------------------------------------------------------------------------------------