Gree CM100N1320 Service Manual Download Page 125

Page: 125 / 276

GREE

GMV5 INDOOR UNIT SERVICE MANUAL

120

3.13.2 Installation space

Model:

GMV-ND22PHS/B-T~ GMV-ND160PHS/B-T

3.13.3 Installation notice



The unit shall be installed by the professional personnel according to this installation instruction

to ensure proper use.



Please contact the local Gree appointed service center before installation. Any

malfunctioncaused by the unit that is not installed by the Gree appointed service center would

probably not be dealt with on time because of the inconvenience of the business contact.



It should be guided under the professional personnel when the air conditioner unit is moved to

other place.



Installation of the unit must be in accordance with National Electric Codes and local regulations.



Improper installation will affect unit’s performance, so do not install the unit by yourself. Please

contact local dealer to arrange professional technicians for the installation.



Do not connect power until all installation work is finished.



If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person in order to avoid a hazard.

3.13.4 Selection of air switch and power cord

Model

Power Cord Size

Air Switch apacity

(A)

Minimum Sectional Area

of Ground Wire

(mm

/AWG)

Minimum Sectional Area

of Power Cord

(mm

/AWG)

GMV-ND22PHS/B-T

220-240V/50Hz
208-230V/60Hz

1.0/AWG18

GMV-ND25PHS/B-T

220-240V/50Hz
208-230V/60Hz

1.0/AWG18

GMV-ND28PHS/B-T

220-240V/50Hz
208-230V/60Hz

1.0/AWG18

GMV-ND32PHS/B-T

220-240V/50Hz
208-230V/60Hz

1.0/AWG18

Summary of Contents for CM100N1320





















































































































































































































































































Search results

Summary of Contents for CM100N1320

Reviews:

Related manuals for CM100N1320

Brands by name

Popular brands

Gree CM100N1320, Service Manual

Search results

Summary of Contents for CM100N1320

Reviews:

Related manuals for CM100N1320

Brands by name

Popular brands