Gree CM100N1320, Service Manual

Page: 90 / 276

GREE GMV5 INDOOR UNIT SERVICE MANUAL
85
5.5 Engineering Application Functions Operated through the
YAP1F Remote Controller
The YAP1F remote controller only provides engineering application functions for setting the master
IDU. For other user operation functions, refer to the
“
Remote Controller Operating Instructions
”
.
The method for setting the master IDU through the YAP1F remote controller is as follows:
No. Button name Function
1 ON/OFF Turn on or turn off the unit
2 TURBO Set turbo function
3 MODE Set operation mode
4 Set up&down swing status
5 I FEEL Set I FEEL function
6 TEMP
Switch temperature displaying type on the unit’s display
7 Set health function and air function
8 LIGHT Set light function
9 X-FAN Set X-FAN function
10 SLEEP Set sleep function
11 CLOCK Set clock of the system
12 TOFF Set timer off function
13 TON Set timer on function
14 Set left&right swing status
15 FAN Set fan speed
16 / Set temperature and time
(For details about the above figures, refer to the instructions 66174100016.)
Perform settings by pressing
“▲” and “▼” in air supply mode:
①
Set the temperature to 30°C.
②
Press
“▼” and then “▲” in five seconds. Repeat this operation for three times.
③
After successful settings,
“UC” is displayed on the receiving indicator panel of the remote
controller for five seconds and
”MASTER” is displayed on the wired controller.