Gree CM100N1320, Service Manual

Page: 61 / 276

GREE GMV5 INDOOR UNIT SERVICE MANUAL
56
status. After quiting the function setting status, the
“ ” icon is on, it means the timer function has been
turned on.
Cancel timer: press
“Function” button to switch to timer function, when “ ” icon flickers, press
“▲”or”▼” button to set the time to be “00”, then the timer function is canceled; press “ON/OFF” button or
without pressing any buttons for consecutive 5 seconds, it will quit the function setting status. After quiting
the function setting status, the
“ ” icon is off, it means the timer function has been canceled.
Count down setting range: 00~24 hours, in which
“00” refers to closedown of timer function. Each
time press
“▲” or “▼” button, if it is within 10 hours, it will increase or decrease 0.5 hour each time, if
long press
“▲” or “▼” button, it will increase or decrease 0.5 hour every 0.3 second; if it is over 10 hours,
each time press
“▲” or “▼” button will increase or decrease 1 hour each time, and if long press “▲” or
“▼” button, it will increase or decrease 1 hour every 0.3 second.
(5) Setting of air renewal function
Air renewal function: through adjusting the fresh air volume to improve the air quality and keep the
indoor fresh air.
Air renewal setting: press
“Function” button to switch to air renewal function, when “ ” icon flickers,
press
“▲”or”▼” button to adjust the air renewal level; after setting air renewal level, press “ON/OFF”
button or without pressing any buttons for consecutive 5 seconds, the air renewal function has been
confirmed to be turned on and then quit the function setting status. After quiting the function setting status,
the
“ ” icon is on, it means the air renewal function has been turned on.
Cancel air renewal: press
“Function” button to switch to air renewal function, when “ ” icon flickers,
press
“▲”or”▼” button to set the air renewal as “00”, then the air renewal function is canceled; press
“ON/OFF” button or without pressing any buttons for consecutive 5 seconds, it will quit the function setting
status. After quiting function setting status, the
“ ” icon is off, it means the air renewal function is
canceled.
Adjustment range of air renewal level: it can adjust the air renewal level to be 00~10, in which
“00”
refers to closing down air renewal function.
(6) Setting of Sleeping Function
Sleeping function: set the unit to enter into sleeping operational status, the unit will operate according
to the preset sleeping temperature curve to create a confortable sleeping environment and improve
sleeping quality.
Turn on or cancel sleeping function: press
“Function” button under power-on status to switch to
sleeping function, when
“ ” icon flickers, press “▲”or”▼” button to turn on or cancel sleeping function.
If
“ ” icon is on, it means the sleeping function is turned on; if “ ” icon is off, it means the sleeping
function is canceled.
There is no sleeping function under auto and swing mode.