Gree CM100N1320, Service Manual

Page: 67 / 276

GREE GMV5 INDOOR UNIT SERVICE MANUAL
62
Parameter
Code
Parameter Name
Parameter
Range
View Method
C06
Preferential
operation query
00: common
operation
01: preferential
operation
Operation method:
In
“C06” status, press the “MODE” button to enter the
preferential operation query interface. Press
“ ” or “ ” to
switch the IDU SN.
Display mode:
Temperature area: displays the project number of the current
IDU.
Timer area: displays the preferential operation setting value of
the current IDU.
C07
Indoor
environment
temperature query
-
Operation method:
In
“C07” status, press the “MODE” button to enter the indoor
environment temperature query interface. Press
“ ” or “ ” to
switch the IDU SN.
Display mode:
Temperature area: displays the project number of the current
IDU.
Timer area: displays the temperature value of the indoor
environment temperature sensor after replenishment.
C08
Prompt time query
for air filter
cleaning
4-416: days Timer area: displays the prompt time for air filter cleaning.
C09
Wired controller
adress query
01, 02 Timer area: displays the adress of the current wired controller.
C11
Indoor unit
quantity query in
one-to-many
mode
1-16
Timer area: displays the number of IDUs controlled by the
wired controller.
C12
Outdoor
environment
temperature query
-
Timer area: displays the temperature value of the environment
temperature sensor of the master ODU.
C17
Indoor relative
humidity query
20-90
Operation method:
In
“C17” status, press the “MODE” button to enter the indoor
relative humidity query interface. Press
“▲” or “▼” to switch
the IDU SN.
Display mode:
Temperature area: displays the relative humidity value.
Timer area: displays the project number of IDU (project
numberes are arranged from small to large).
If the HBS network consists of only one IDU, the timer area
directly displays the IDU relative humidity value in the
“C17”
interface.