GRAUPNER mx-16 ifs, Programming Manual

Page: 125 / 132

125 Appendix
magic box
Order No. 3162
The magic-box opens up a wide range of potential applications to the
demanding RC modeller. The magic-box enables you to distribute one
servo function to a maximum of four servos, speed controllers, etc..
A selector switch is used to select each of the connected servos
individually, after which two buttons are used to program its direction of
rotation, travel, centre and end-points accurately and permanently. At
any time all the settings can be changed and the new settings stored.
If the jumper is connected, power to the magic-box and the servos
connected to it is supplied via the RC system; alternatively an external
battery can be used, connected to the gold-contact socket.
Centre adjustment, variable by +/-25%. •
End-point adjustment, variable by +/-25% for each servo and each •
side of centre.
Servo travel, variable by +/-50% for each servo.
•
Direction of servo rotation, can be reversed separately for each ser- •
vo.
Total reset function: resets all settings to the factory default values.
•
XZ-P1 iFS programming adapter
Order No. 23300
The programming adapter is connected to one of your PC’s USB
sockets using a Mini-USB-B / USB-A connecting lead (standard item
supplied with digital video and stills cameras), and enables the user to
program the settings of
Graupner | iFS RF modules or Graupner | iFS
receivers wirelessly, and also to update the fi rmware of current Graup-
ner | iFS RF modules and Graupner | iFS receivers.
The associated PC software is self-explanatory and easy to use; it can
be downloaded at any time from the iFS website. A graphic 2.4 GHz
band scanner is also available as a useful option for the unit; this gives
a swift overview of the conditions on the band.
Dimensions: 31 x 31 x 13 mm
PRX (Power for Receiver)
Order No. 4136
A highly developed, stabilised receiver power supply with intelligent
power management.
This unit guarantees a stabilised, user-variable power supply for the
receiver, with the aim of further enhancing the reliability of the power
supply. It is suitable for use with a wide range of receiver batteries, and
therefore forms a simple means of providing a reliable power supply in
a very wide range of models. If the battery voltage should collapse –
even if only briefl y – while the system is operating, the unit stores the
event and indicates it subsequently. The user is therefore warned of an
inadequate or even failing receiver battery, and can implement suitable
counter-measures in good time.
For use with one or two receiver batteries. •
(simultaneous discharging when used with two batteries)
For use with fi ve-cell or six-cell NiMH batteries or two-cell LiPo or
•
LiFe batteries. GRAUPNER/JR G3.5, G2 and BEC connectors
Three user-selectable output voltage levels for powering the receiv- •
er (5.1 V / 5.5 V / 5.9 V)
Two ultra-bright LEDs indicate the operational state of Battery 1 and
•
Battery 2 separately.
Integral high-quality On / Off switch.
•
Heavy-duty construction for handling high currents. •
Low-profile switch and LEDs, to avoid spoiling the model’s appear- •
ance.
In-line arrangement of mounting lugs, LEDs and switch for simple
•
installation using the drilling template supplied.