GRAUPNER mx-16 ifs, Programming Manual

Page: 59 / 132

59 Program description: transmitter control settings – fi xed-wing model
Tips:
When assigning the switches please take care to set •
them to the appropriate direction of travel, and en-
sure that all inputs not required are left at or set to
“empty”, to eliminate the possibility of errors if un-
used transmitter controls are operated accidentally.
You can alter the effective end-points of an assigned
•
switch by adjusting servo travel as described in the
next section.
The screen now displays either the transmitter control
number or the switch number, followed by a switch sym-
bol which indicates the direction of operation, e. g.:
I5
I6
I7
+
t r v
100% 100%
100% 100%
100% 100%
SEL SYM ASY
1
c t r l 7
e m p t y
+ +
+ +
+ +
Column 3 “- trv +”
Hold the rotary cylinder pressed in to select one of the
inputs 5 to 8.
Use the rotary cylinder to select
SYM or ASY in the
“- trv +” column, and press the rotary cylinder briefl y to
activate travel adjustment. You can now use the rotary
cylinder to set the control travel within the range -125%
to +125%, either symmetrically (
SYM ) to both sides …,
I5
I6
I7
+
t r v
100% 100%
100%
100%
SEL SYM
1
c t r l 7
e m p t y
+ +
+ +
ASY
111% 111%
+ +
… or asymmetrically ( ASY ):
+
100% 100%
100% 100%
SEL SYM
1
+ +
+ +
ASY
88% 111%
+ +
I5
I6
I7
t r v
c t r l 7
e m p t y
If you wish to make asymmetrical adjustments, you must
move the transmitter control or switch in the appropriate
direction before altering the setting. When the fi eld is
highlighted, you can change the setting.
Negative and positive parameter values are possible;
this enables you to set the appropriate direction of
movement of the transmitter control to suit your model.
Pressing
CLEAR resets the control travel in the high-
lighted fi eld to 100%.
Important:
In contrast to servo travel adjustments, changing the
transmitter travel setting affects all mixer and coupling
inputs, i. e. all servos which are affected by that transmit-
ter control.