46
Program description: basic settings – fi xed-wing model
Basic settings
Basic model-specifi c settings for fi xed-wing model aircraft
Before you start programming specifi c parameters,
some basic settings must be entered which apply only
to the currently active model memory. Select the »
base
sett.
« menu with the rotary cylinder, and press
ENTER
or the rotary cylinder:
mod.mem.
ser vo set.
D/R expo
wing mixer
contr set.
phase trim
free mixer
base sett.
Model name
model name
stick mode
tail type
motor on C1
1
normal
no
Press
ENTER
or the rotary cylinder to move to the next
screen page (
), where you can select characters
to assemble the model name. You can enter up to nine
characters to defi ne a model name:
0 1 2 3 4 5 6 7 8 9
PQRSTUVWXYZ
model name
?
: ;
A
B
CDEFGHIJKLMNO
GRAU
B
Use the rotary cylinder to select the fi rst character in the
symbol fi eld. A brief press on the rotary cylinder (or turn-
ing it when pressed) moves to the next position in the
name, at which point you can again select a character.
Pressing
CLEAR
inserts a space at that point.
You can move to any character position within the input
fi eld with the rotary cylinder pressed in; it is indicated
by a double arrow <––> above the input fi eld while the
rotary cylinder is held pressed in.
The model name entered in this way appears in the
basic display, and also in the sub-menus of the »
mod.
mem.
« menu.
Stick mode
Basically there are four possible ways of arranging the
principal control functions of a fi xed-wing model on the
two dual-axis sticks: the primary functions are aileron,
elevator, rudder and throttle (or airbrakes). Which of
these options you select depends on your individual
preferences and fl ying style:
»
MODE 2
« (Throttle at left stick)
»MODE 3«
(Throttle at right stick)
»MODE 4«
(Throttle at left stick)
»MODE 1«
(Throttle at right stick)
elev. down
elev. up
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
full throttle
left r
udder
right r
udder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left r
udder
right r
udder
When you select “stick mode” with the rotary cylinder
pressed in, you will see
SEL
at the bottom edge of the
screen:
1
normal
SEL
GRAUBELE
model name
stick mode
tail type
motor on C1
no
Press the
ENTER
button or the rotary cylinder, and the
current stick mode is highlighted (inverse video – black
background). Now use the rotary cylinder to select one
of the options 1 to 4.
Pressing
CLEAR
resets the function to stick mode “1”.
motor on C1
1
normal
SEL
GRAUBELE
model name
stick mode
tail type
motor on C1
no
When you select “motor on C1” with the rotary cylinder
pressed in, you will see
SEL
at the bottom edge of the
screen. Press the rotary control briefl y: the current set-
ting is highlighted. Now use the rotary cylinder to switch
between the four possible options:
“idle fr.”:
The idle position of the throttle / airbrake
stick (Ch 1) is forward, i. e. away from the
pilot.
The throttle warning message “Throttle
too high” is
activated
(see page 18). In
the »
wing mixer
« menu the “Brake
¼
N.N.*” mixers are
disabled
.
“idle re.”:
The idle position of the throttle / airbrake
stick (Ch 1) is back, i. e. towards the pilot.
The throttle warning message “Throttle
Summary of Contents for mx-16 ifs
