GOLDONI 26RS, Operation And Maintenance

Page: 98 / 200

97
5. SERVICING – CLEANING – LUBRICATION
Warning! Check the levels:
•
Before using the machine
•
With the machine at a standstill and the engine off (for at least the past
hour).
•
On a flat surface.
5.1 ENGINE
Consult the engine instruction manual.
5.2 GREASING
After every 50 hours service, grease the points indicated in:
Mod.RS - Mod. R
Fig.1 N°23: Axial articulation (n.1 fig.19).
Fig.7 N°1: Front right and left wheel articulation: 2 grease nipples (and plug N°
2 fig.7 Mod.45RS-45R) each side.
Fig.12 N°2: shoe expansion control pin, after having removed plugs N° 1 fig.13
(Mod.45RS-45R only).
Fig.8 n.1: Gearbox levers, 2 grease nipples for Mod.45RS-45R.
Fig.19.n.2: Cables clutch
Mod.SN - Mod.A
Fig.23 N°1: Axial articulation (N°1 fig.19).
Fig.23 N°2: Clutch cable (N°2 fig.19).
Fig.23 N°3: Central articulation 2 grease nipples (bottom and top)
Fig.23 N°4: Steering cylinder
Fig.23 N°5: Power lift rod
It is advisable to use AGIP GREASE LP2.
5.3 OIL SUPPLY
5.3.1 Gearbox housing and front power lift
Check the level after every 50 hours service by means of the plug with breather
and dipstick N° 22 fig.1.
It is advisable to use AGIP SUPER TRACTOR UNIVERSAL SAE 15W/40 oil.
Change the oil after every 800 hours service. The required quantity is approx.
•
11 Kg. Mod.26RS-30RS
•
11 Kg. Mod.30SN-40SN-30A-40A
•
12,5 Kg. Mod.W40RS
•
13,5 Kg. Mod.45RS-45R
Oil draining: plug N° 1 fig.9.
Oil filling: plug N° 22 fig.1.
Keep the oil breather plug clean N° 22 fig.1.