GILES EOF Series Operation & Service Manual Download Page 82

Page: 82 / 128

Fryer Operation

EOF SERIES FRYERS

20. When programmed cook time has elapsed, an alarm will

sound.

EOF-20/24: Upper OLED Display

⑱

reads

“ALARM DONE COOKING - LEFT RIGHT or BOTH”

...

Appropriate

EOF10-10

display

⑱

will read

“

ALARM

DONE COOKING - LEFT or RIGHT”

If Lifts are installed,

cook Basket(s) will automatically be raised from the hot

oil. Press the

[ALARM]

⑰

key to silence alarm.

21. As necessary, remove Baskets with cooked product from

vat, or Basket Lift, and dump product into Dump Station

for draining.

If “batch” cooking

large quantity of

product, use the

provided scoop-

style Basket to dip

product from oil

and place into

Dump Station.

23. After allowing product to adequately drain and while it is

still hot, place into food pan for handling according to User

standard practices.

23. To continue cooking return to

Step-10

To shut-down unit, see

Section 5.7, Normal Shut-Down

19.

[STIR ALARM]

feature - see

Section 5.1.6, Cooking Cycle Overview

and

User

Settings, Section 5.1.8

for details.

If enabled

, after a preset amount of the programmed cook time has

elapsed, an alarm sounds and the

Upper OLED Display

EOF20/24

reads

“ALARM STIR LEFT RIGHT or BOTH SIDE”

... on

EOF10-10

each vat side

displays separately

Press the

[ALARM]

key

⑰

and using the provided stirring utensil

⑯

stir

the cooking product. If using Basket Lifts, be careful not to dislodge Basket

from Basket Lift Carrier while stirring.

Basket Lift

Basket Hanger

Always wear thermal protective gear, such as oven

mitts or gloves, when handling hot Baskets.

EOF-20 or EOF-24

EOF-10-10

5.2.

Cooking Procedure - continued

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands