GILES EOF Series Operation & Service Manual Download Page 91

Page: 91 / 128

Cleaning

EOF SERIES FRYERS

1. Remove waste oil from the fryer unit, see

Section 5.5, Removal of

Waste Cooking Oil from Fryer

2. Ensure the Drain Valve Handle

①

is pushed in and locked in the

[CLOSE]

position and the Power Switch

③

is in the

[OFF]

position.

3. Fill the vat with clean water to the

FULL

level mark

②

4. Use a reputable

Boil-Out/Fryer Cleaning

product and follow the

manufacturer’s usage instructions. Add the recommended

amount of product to water in the vat and stir to mix.

Fryer cleaner is available from Giles ... Order part number:

72003-1, 8-Lb Container

72003, Case of 4 Containers

- OR -

6. Cleaning

This section explains cleaning procedures for

EOF Series Banked Fryers

. Giles recommends that general cleaning,

including Filter Pan cleaning, be performed on a daily basis, at a minimum.

•

DO NOT wash down the unit interior or exterior with water from a spray hose or any pressure-type washer.

•

Failure to comply with DANGER notices will result in death or serious injury, equipment or property damage,

and void the warranty.

This section explains use of the Boil-Out procedure for cleaning the Fryer cook vats. A Boil-Out procedure must be

performed before cooking in new equipment and should be performed each time the cooking oil is changed.
For proper fryer maintenance and operation, a Boil-Out Procedure should be performed every 7 to 14 days, at a

minimum.

6.1. Boil-Out Procedure - Cleaning the Fry Vat

DO NOT leave the Fryer unattended during this procedure as it may become necessary to adjust the heat

setting to prevent a rolling boil and vat overflow. An overflow can result in serious equipment damage.

Continued on Next Page

Closely follow the product manufacturer’s usage instructions and

hazard warnings. Many commercially available cleaners contain

caustic chemicals and require special precautions when used.

Improper use could damage the fryer and potentially present a

personal injury hazard.

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands