GILES EOF Series Operation & Service Manual Download Page 57

Page: 57 / 128

Fryer Operation

EOF SERIES FRYERS

ALARM Reset Key

: Pressing this key silences the Controller alarm and acknowledges certain status

messages.

CLOCK Key

: Press this key to begin manually setting a cooking time (mm:ss).

Press this key during preheat to enter the

BOIL OUT

mode. Temperature setpoint and time

changes to the

BOIL TEMP

and

BOIL OUT TIME

as specified in

USER SETTINGS (see

Section 5.1.7,

Access & Edit User Settings

). Default = 200°F & 30 minutes

Press this key to enter

COOL

mode, which allows the Fryer to idle at a lower temperature during

inactive periods to save energy. Temperature setpoint changes to the

COOL TEMP

specified in

USER SETTINGS (see Section 5-01.7, Access & Edit User Settings) ... default setting = 275°F

5.1.1.

Keys and Functions - continued

BASKET Key

: Activates the

UP/DOWN [2 - 8]

keys to manually operate Fryer Basket Lifts. Key is

disabled during

PREHEAT

phase to prevent lowering product into oil that is not yet at cooking

temperature.

This key is ONLY active if Basket Lifts are installed.

Upper OLED Display

: Displays menu preset information, Fryer status

information, and operational prompts and instructions.

Lower 7-Segment Display

: Displays various status information, cook cycle time

countdown, temperature, etc.

Indicators

[HEAT]

illuminates to indicate that Controller is calling for

heating elements to energize.

[LEFT/RIGHT Timer]

illuminates to

indicate which Timer is active.

TEMP Key

: Press this key to set the cooking oil temperature setpoint. Pressing this key twice (2x)

will display

ACTUAL OIL TEMPERATURE

on the

Lower Display

for approximately 20 seconds.

EDIT Key

: Action key which is pressed in combination with other keys to enter edit mode to

change or create Menu Item preset settings.

MENU Key

: Action key which is pressed in combination with other keys to access programmed

menu presets. Fifty (50) different Menu Item cooking presets can be programmed.

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands