GILES EOF Series Operation & Service Manual Download Page 13

Page: 13 / 128

Introduction

EOF SERIES FRYERS

Computer Controller:

Controls cooking oil temperature and cook time (separate timer for each Basket). Features

fifty (50) programmable Menu Item cooking presets. Monitors fryer status, and displays various operational

warnings (DRAIN OPEN, MAX ELEMENT TEMP, etc.) and operational instruction prompts. Features BOIL-OUT

program, COOL-MODE, FORCE FILTER function, available password security, and multiple language selections.

Controller displays operational instructions to ensure smooth operator interface.

Built-in Oil Filtration System:

Completely self-contained; helps to extend the life of cooking oil. Designed to

perform a filter cycle within approximately five (5) minutes. Service each fryer well in the battery.

Dump Station (FFLT - Fried Food Landing Table)

: Built-in dump station; convenient location to dump product for

draining after cooking. Oil drainage is returned to the Filter Pan underneath.

10-10 Split Vat

: EOF10-10 Models feature one fryer unit with a split cooking vat, providing two (2) completely

separate 10” wells for cooking different food types, such as poultry and seafood, without significant cross-

contamination of the cooking oil.

Automatic Basket Lift

: Automatically lowers Basket at beginning of cooking cycle and lifts cooked product from hot

cooking oil when programmed cooking time has expired. Helps prevent over-cooking. Standard feature on the 20”

and 10” wells.

Introduction

THANK YOU

for purchasing the

Giles EOF Series Fryer

, manufactured by

GILES Food Service Equipment;

Montgomery, Alabama (USA), hereafter referred to as "Giles".

EOF Series Fryers

are high-volume banked units with

either two (2), three (3) or four (4) wells, in combinations of 10”, 20” and 24” wide. Every unit is thoroughly

inspected and tested prior to shipment in efforts to ensure that it will operate flawlessly when received. With

proper care and maintenance the appliance will provide years of trouble-free service.
To help protect your investment in this state-of-the-art cooking equipment, we recommend that you take a few

moments to become familiar with the installation, operational, cleaning, and maintenance procedures contained in

this Manual. Adherence to these recommended procedures will minimize the potential for costly “downtime” and

future repair expense. Please retain this manual for future reference.

NOTE: Due to continuing improvements and product enhancements, some of the illustrations shown in this manual might

not exactly depict current models.

Appliance exterior cabinet and fry vats are constructed of 430 Series Stainless Steel of applicable gauge.

1.1

Construction

1.2

Standard Features

Automatic Basket Lift

: Can be added as optional feature for 24” vats. Automatically lowers Basket at beginning of

cooking cycle and lifts cooked product from hot cooking oil when programmed cooking time has expired. Helps

prevent over-cooking.

1.3

Optional Features

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands