GILES EOF Series Operation & Service Manual Download Page 10

Page: 10 / 128

viii

Safety

EOF SERIES FRYERS

Specific Safety Precautions:

For your safety, please observe the following precautions when operating or servicing

EOF Electric Fryers

. Adhering

to the following important safety precautions will help Users to avoid personal injury and/or damage to the equip-

ment.

• Before cleaning or performing maintenance, place power switch in the

OFF

position. Unplug power cord or turn

OFF

power at the electrical panel supplying power to remove all power from the appliance.

•

DO NOT

wash down the Fryer interior or exterior with water spray.

• Failure to comply with

DANGER

notices will result in serious injury, even death; or damage to equipment and/or

property and may void the factory warranty.

• Prior to installation, consult a qualified electrician to ensure that installation complies with all electrical require-

ments and codes.

• The unit must be adequately and properly grounded. Improper grounding may result in electrical shock to User.

Always refer to local electrical code to ensure proper grounding of this or any other electrical equipment.

• Check the rating label on the unit to determine the proper power supply required. Always consult with an elec-

trician, or other qualified service technician, to ensure that circuit breakers and wiring are of sufficient rating

and gauge to power this equipment. A Wiring Diagram has been provided with the unit as an aid for techni-

cians. Appliance must be installed and electrically grounded in accordance with local code, or in the absence

of local code, in accordance with the National Electrical Code, NFPA 70.

• Improper installation, adjustment, alteration, service, or maintenance could result in serious injury, even death;

equipment and/or property damage; and will potentially void the factory warranty.

•

DO NOT

use or store flammable liquids, or materials that produce flammable vapors, in the vicinity of this or

any other appliance!

•

DO NOT (or ALLOW OTHERS) for any reason, stand or step onto the top of the appliance

. Cooking

oil in Fryers can be

EXTREMELY HOT (excess of 330

F [166°C]).

Bodily contact will cause extremely

serious injury. Lids used to sometimes cover cooking vats/pots are not designed to, and

WILL NOT

support the weight of a person.

• Failure to comply with

WARNING

notices could result in serious injury, even death; damage to equipment

and/or property; and will potentially void the factory warranty.

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands