GILES EOF Series, Operation & Service Manual

Page: 64 / 128

52
Fryer Operation
EOF SERIES FRYERS
Continued on Next Page
Press the [MENU]
key twice (2X)
Use numeric keypad [2] up & [8]
down to scroll through list to
desired Menu No.
Press [EDIT] key (not START )
to select & display current
Menu settings.
Use numeric keypad [2]-up &
[8] - down to select what to edit
[NAME]
[TIME]
* [TEMP]
[STIR]
[FISH FLTR]
“<-Press START” points to setting
to be edited.
Press
[START] key
to begin
edit
Select edit NAME as shown
on left. Flashing cursor is
positioned at 1st letter.
Use keypad [2]-up or [8]-
down to scroll letters,
character changes at cursor
position while scrolling.
Stop at desired character,
then use [4]-left or [6]-right
to move cursor to next
character; repeat to spell
NAME .
+
Select edit NAME as shown
on left. Flashing cursor is
positioned at 1st letter.
Press [0] key to open
Catalog of programmed
names and use keypad [2]-
up or [8]-down to scroll
through list. Press [START]
to copy NAME into the
Menu Item being edited
and return to previous
display.
NOTE: Left-hand side on Dual Display Controller is
active when editing Menu Items.
5.1.5.1. Editing a Menu Preset
* [TEMP] is NOT
available for
edit on the
EOF20/24
Controller
Two different methods may be used to edit NAME, see
instructions (A) & (B) on the right.
A. Edit [NAME] - Method 1:
Enter NAME letter by letter.
B. Edit [NAME] - Method 2:
Select NAME from Catalog of programmed names.
When finished editing NAME , press [START]
to Save -OR- press [CLEAR] to Cancel and Exit
without saving
If done, press [START] to
Sav e
-OR-
press [CLEAR] to Cancel and
Exit without saving -OR- [0]
to re-open catalog.
Pressing [CLEAR] 2X will Exit
from Editing.