GILES EOF Series Operation & Service Manual Download Page 74

Page: 74 / 128

Fryer Operation

EOF SERIES FRYERS

5.1.8.

User Settings - Accessing & Editing

Press the

TIME

key

9 9 9 9

Use numeric keypad

[4] - [6]

(left/right) to scroll through list until

desired Setting is shown on the

Upper OLED Display

To exit the

USER SETTINGS

menu, press the

[CLEAR]

key.

To edit the setting press the

[EDIT]

key. Use numeric keypad

[2] - [8]

(up/down) to change the value. Press

[EDIT]

again to

save the new value.

Press the

START

key

NOTE:

The message

TOO LOW

TOO

HIGH

will be displayed if a value

being entered is outside the
allowable range and would cause
a Controller error for the current
state of the Fryer.

NAME

DESCRIPTION

RANGE

DEFAULT

TEMP SCALE

Temperature scale

°F or °C

°F

FORCE FILTER

When

, forces user to filter oil after the specified number of

cook cycles are complete ... locks-out Fryer.

ON - OFF

FORCE FILTER

SNOOZE

Allows (1) more cook cycle after FORCE FILTER count exceeded

when FORCE FILTER = ON.

ON -OFF

OFF

FILTER COUNT

Number of cook cycles before user is required to filter.

1 to 20

GUARD BAND

Cooking not allowed if oil temperature is outside of the

setpoint by amount of guard band

1 to 990

900

MAX SETPOINT

Maximum oil setpoint allowed.

32°F to 350°F

350°

AUTOCOOL

After a specified amount of time, unit will go into COOL mode. ON - OFF

OFF

AUTOCOOL TIME

(MINUTES)

AUTOCOOL

, then after fryer is idle for the amount of

time specified here, the unit will go into

COOL

mode.

1 to 510 minutes

AUDIBLE ALARM

(SECONDS)

Duration of the audible alarm in seconds.

5 to 120 seconds

COOL TEMP

Temperature of the

COOL

mode

200°F to 350°F

275°F

BOIL TEMP

Temperature of the

BOIL OUT

mode

185°F to 208°F

200°F

FILTER RESET

Temperature that allows exiting of filter mode

200°F to 325°F

290°F

BOIL OUT TIME

Time (in minutes) for

BOIL OUT

mode

1 to 45 minutes

STIR ALARM

ENABLE

If enabled, allows the stir alarm to come on during a cook cycle. ON - OFF

STIR ALARM %

When

STIR ALARM

, the alarm will sound after this % of

the cooking cycle is complete.

10% to 90%

62%

KEY BEEP ENABLE If enabled, audible sound generated with each key press.

ON - OFF

OFF

LANGUAGE

Sets the Controller language

English-Spanish-

French

English

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands